background image

INSTRUCTION/OPERATION MANUAL

FOR EZ LIGHT

MODEL: EZ2420

Important Safety Instructions ..........................................................................1
List of Components and Specifications............................................................2
Installation ...................................................................................................2-5
Operation ........................................................................................................5
Winterization...................................................................................................6
Troubleshooting...............................................................................................7
Warranty……………...........................................................……………….8

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

To reduce the risk of injury, do not permit children to use this product unless they are
closely supervised at all times.

Any modifications to this product will void the warranty.

Do not allow children to use, touch, or play near or around the unit’s power pack.

Do not use if unit is damaged in any way.

Make sure the battery is removed before opening the unit or performing any other
maintenance.

To protect against risk of electrical shock, do not perform maintenance while standing in
water or in pool.

If the light is not working as it should or has been dropped or damaged in any way,
contact 

TABLE OF CONTENTS

!

WARNING: 

!

WARNING: 

!

WARNING: 

!

WARNING: 

!

WARNING: 

!

WARNING: 

!

CAUTION:

Summary of Contents for EZ LIGHT EZ2420









Reviews: