Cerberus P 6311-07A
24
•
Encapsulation
Select the encapsulation protocol your ISP uses. The following section will vary
depending on which encapsulation protocol you select.
•
Dynamic
IP
Address
Select this option if your ISP provides you an IP address automatically. Please enter the
Dynamic IP information accordingly.
Encapsulation
– Select your encapsulation type from the dropdown list.
NAT
– Select whether NAT (Network Address Translation) is Enabled or Disabled.
Default Route
– Select whether this PVC will be the default route for Internet data.
TCP MTU Option
– Enter TCP MTU (Maximum Transmission Unit) Value here.
Dynamic Route
– Select the RIP type and direction from the dropdown lists.
Multicast
– Select the multicast protocol you wish to use from the dropdown list.
•
Static
IP
Address
Select this option to set static IP information.
Encapsulation
– Select your encapsulation type from the dropdown list.
Static IP Address
– Enter the static IP Address here.
IP Subnet Mask
– Enter the IP Subnet Mask here.
Gateway
– Enter the Gateway address here.
NAT
– Select whether NAT (Network Address Translation) is Enabled or Disabled.
Default Route
– Select whether this PVC will be the default route for Internet data.
TCP MTU Option
– Enter TCP MTU (Maximum Transmission Unit) Value here.
Dynamic Route
– Select the RIP type and direction from the dropdown lists.
Multicast
– Select the multicast protocol you wish to use from the dropdown list.
