Pentagram Cerberus P 6311-07A User Manual Download

Page: 52 / 61

Cerberus P 6311-07A

SysRestart

The SysRestart screen allows you to restart your router with either its current settings still in
place or the factory default settings.

System Restart with

– If you wish to restart the router using the factory default settings (for

example, after a firmware upgrade or if you have saved an incorrect configuration), select

Factory Default Settings

to reset to factory default settings. Otherwise, you can select

Current Settings

. You may also reset your router to factory settings by holding the

DEFAULT

button on the back panel of your router in for 10-12 second while the router is turned on.

Click

RESTART

to start this process.

Diagnostics

The Diagnostic Test page shows the test results for the connectivity of the physical layer and
protocol layer for LAN & WAN sides.

Virtual Circuit

– Select which PVC you wish to test from the dropdown list. The router will

automatically run diagnostic tests on that circuit. A green

PASS

means that the given test was

passed, a red

FAIL

means that the test was failed and a green

SKIPPED

means that the test

was skipped.

Summary of Contents for Cerberus P 6311-07A






























































Search results

Summary of Contents for Cerberus P 6311-07A

Reviews:

Related manuals for Cerberus P 6311-07A

Brands by name

Popular brands

Pentagram Cerberus P 6311-07A, User Manual

Search results

Summary of Contents for Cerberus P 6311-07A

Reviews:

Related manuals for Cerberus P 6311-07A

Brands by name

Popular brands