INSTALLATION INSTRUCTIONS
17
B
C
A
3.2 Unpacking
■
The materials (cardboard) used for packing the
appliance are fully recyclable.
■
It is recommended that the packing material is only
removed prior to installing the combination water
heater. The manufacturer will not be held responsible
for damage caused by incorrect storage of the product.
■
Packing materials (plastic bags, polystyrene, nails,
etc.) must not be left within reach of children, in that
these items represent a potential hazard.
A.
Place the packed appliance on the floor (see fig. 1)
making sure that the "up” arrow is facing down. Remove the
staples and open out the four flaps of the box.
B.
Rotate the combination water heater 90° while manually
supporting it from underneath
C.
Lift the box and remove the protections. Lift the
combination water heater by grasping the rear part and
proceed with the installation.
STORAGE & HANDLING
Please note that prior to installation the Pensotti North America combination water heaters should be stored in the
horizontal position with no more than three combination water heaters to a stack;
Ensure that the combination water heaters are stored in dry conditions and be aware that the carton is a two-man lift;
Fig 1
Summary of Contents for PCI 18
