Pensa Labs D.I.Wire Pro, Manual, Page: 27 / 84

Path &
Workspace Info
04 | PATH MODE
GRID SIZE OVERALL
WIDTH
BEND
POINTS
SCALE
SNAP
TO GRID
OVERALL
HEIGHT
PATH
LENGTH
SNAP TO
ORIGINAL
PATH
SEGMENT
LENGTH
Size of the grid on the workspace and the
units in use
Overall width of the path
Number of bend points of the
active path
The scale of the part relative to
its initial size.
Bend points and line segments will snap
to the grid as they are moved around on
the workspace.
Overall height of the path
The estimated total wire length
needed for the part
Bend points and line segments will snap
to the ghosted imported path as they are
moved around on the workspace.
Shows the minimum distance between
bend points on a path. Enter a small
segment length value to get a smoother
curve with many bend points.
8.25” (209mm) of extra wire is needed
in addition to the path length so that
the feed wheels are always engaged.
Change the units by going to the Edit Tab and
selecting Change Units.
S L O O T D I R G O F N I H T A P
The Path Info section displays properties of the shape and Grid Tools
provide Grid Size units and Snap behavior control.
27