Pensa Labs D.I.Wire Pro, Manual, Page: 14 / 84

POWER OFF
ADULT
SUPERVISION
REQUIRED
AVOID
LOOSE
CLOTHING
TIE
HAIR
BACK
TO STOP
MACHINE
REMOVE
JEWELRY
Power off your D.I.Wire when not in use
Loose jewelry, like necklaces and/or
braceletscan get caught in the moving
components. Remove all loose jewelry
items before operating the D.I.Wire.
Long sleeves, ties, sweaters, hoodies
and other loose clothing can get
caught in the moving components.
Do not wear loose clothing while
operating the DIWire
Long hair can get caught in between the
moving components and seriously hurt
you. Long hair must always be tied back
Press STOP or PAUSE in WireWare, or
Hit the Power Button
MOVING
PARTS
NEVER touch the Bend Pins or
Feed Wheels during bending. Allow
the D.I.Wire to finish bending before
reaching into the top plate.
STOP
Your safety and the safety of others is very important to us, so we have provided the
following safety section and other safety-related messages along the manual. Always
read and follow all safety messages.
NEVER TOUCH
MOVING PARTS!
AVOID
WATER The D.I.Wire and its power supply are not
water proof, keep clear of water and other
liquids. Refer to the maintenance section
for cleaning instructions. Keep the power
adaptor away from water
Not a toy, the D.I.Wire is intended for use
only by or under supervision of adults
!
!
!
!
!
Bend Safety
02 | SETUP AND SAFETY
Orient the machine so the switch
is easily accessible
Tip: don’t put your coffee cup
on top of your D.I.Wire!
14