Pensa Labs D.I.Wire Pro, Manual, Page: 19 / 84

Clamp Adjustment
03 | BENDING
If the Feed Wheels are slipping, meaning they are not effectively pulling
wire through, the Clamp Adjust needs to be modified.
Turn the Clamp Adjust on the D.I.Wire with the preset torque
wrench that came with the machine until it clicks once.
Over time, it is possible to get a feel for variation in how different materials should be
clamped. Record clamp force in each Material Profile.
WHAT’S
NEEDED
If your application needs higher clamping force, email us at support@pensalabs.com
TORQUE WRENCH 1/4” HEX BIT
CLAMP ADJUSTMENT 2
PREPARATIONS
Torque wrench uses a stepped 5/32” to 1/4” hex bit.
1
You received a pre-set torque wrench that has been selected
for your specific application. Do not over-tighten the clamping screw
as this may damage your machine or your wire.
19