Driver Software Functions
53
4.3.1. Requirements
Before using
Multiple Monitors
function you need the following:
- A display card that supports multiple monitors such as the Matrox, nVidia,
ATI, etc.
- (Two or more display cards supported by Windows are also ok.)
- Two or more touch screens
- Two or more Serial Ports
- Two or more PenMount 9000 control boards such as the 9036CH or
9026BH.
- PenMount Windows Universal Driver (for 2000/XP/2003/VISTA/7/8).
Before using
Multiple Monitors,
you must have two or more monitors that are
in extension mode. For display cards that support multiple monitors, we
suggest you consider Matrox, nVidia, or ATI cards and inquire about operation
and usability issues.
Note:
Before you can use multiple monitors, you need to map each monitor.
Enable Multiple Monitors
Enable the multiple display function as follows:
1. In
PenMount
Control Panel
, under
Multiple Monitors
tag, check the
“
Multiple Monitor Support
” box. Then click “
Map Touch screens
” to
assign touch controllers to displays.
2. When the mapping screen message appears, click “
OK
”.
3. Touch each screen as it displays “
Please touch this monitor. Press ‘S’
to skip
”. Follow this sequence and touch each screen to map the touch
screens.
