Install Drivers for 9000 Boards
15
Calibrate
The two screen areas are
Initial
and
Calibrate
. Click
Calibrate
to
map the touch screen. The display shows a circle in the screen’s
upper-center, touch it. The display then shows a circle in the
right-center, bottom-center and left-center of the screen. Touch
these circles to map the touch screen to the display. Press the
Initial
button to re-establish the connection with the control board
conveniently if the RS-232 serial port becomes disconnected.
Setting
This sets mouse performance, double click area, speed and testing
area.
Draw
This drawing function tests and demonstrates the touch screen.
Menu items include
CLEAR
and
EXIT
.
About
This displays the PenMount controller information.
3.2.3.
Uninstall Windows 3.1 Driver
Click this icon and the system removes all utilities and the PenMount group
automatically.
3.3.
Install PenMount Windows 95 Driver
Before installing the Windows 95 driver software, you must have the Windows 95
system installed and running on your computer. You must also have installed either
PenMount9026BH or 9036CH control board.
3.3.1. Install
PenMount Windows 95 Driver
Contents of the PenMount Windows 95 driver folder are listed below.
_INST32I.EX _SETUP.EXE
_ISDEL.EXE OS.DAT
LANG.DAT
_SETUP.DLL
SETUP.INS
DATA.TAG
SETUP.INI _SYS1.HDR
