Install Drivers for 9000 Boards
12
If you cannot find the PenMount, come 'configure' to set your COM port.
5. Configure
COM Port: COM5~COM9 is for customized settings.
IRQ
no.:
IRQ3~IRQ15
I/O base:
COM1~COM4 are fixed while COM5~COM9 are for
customization.
Baud:
19200 / 9600
Calibrate:
left, right, top, and bottom point.
POMODE:
the relationship between touch panel and monitor.
Beep Duration: beep duration time (0ms~5500ms), 0ms = turn off the
beep.
Beep Freq: beep frequency (20Hz ~10000 Hz)
Other configurations for customization in PenMount 9000:
jitter
threshold
SSD
threshold
Z
threshold
pen-up
threshold
digital
filter
Function Key:
[ESC]
- exit
[Tab]
- toggle the fields
[up]
- increase
value
[down]
- decrease value
[right]
- increase value by 100 (Beep Freq)
[left]
- decrease value by 100 (Beep Freq)
[Enter]
- save configuration and exit
6. Packet
By using this function, you can get the touch data. Simply touch the
screen and you will see the data gotten.
The output format is as follows:
<counter> : counter of raw data
* : current
dot
<raw data> : the raw data of touch
<coordinate> : the X, Y of A/D
<offset> : the offset between last dot
Function Key:
[ESC] - exit
7. Help
See 'README.TXT' file
8. Test