PENKO 1020 FMD, Manual

Page: 82 / 110

1020 FMD
82
Rows
For the ticket layout, the number of rows represents the empty lines after each ticket.
For the line layout, the number of rows represents the total number of rows for the header and
the lines. When set to 1 for example, each printed line gets a header. When set to 10 for
example, each 6 lines get a header (in case the header is 4 lines).
Range
0…80
Margin
Set the number of empty spaces before printing.
Range
0…80
Newline
Select the end of line sequence. When Zebra ZPL II is selected, a printer with this protocol can
be used. The Zebra printer commands are automatically added to the printer ticket.
Available options
CR
LF
CR+LF
CR+00
None
Zebra ZPL II
Port
Select the communication port used for the printer.
Available options Description
None No printer
RS232 port Set the printer parameters in System Setup - Communication - RS232
RS422 port Set the printer parameters in System Setup - Communication - RS422
IP Number Set the printer IP address in Ethernet printer - IP number
Alibi Memory See chapter Alibi Memory and Event Log