PENKO 1020 FMD, Manual

Page: 58 / 110

1020 FMD
58
Signal
The current voltage, from the load cell or force sensor, in millivolts.
ADC
The current ADC value.

Points show the stored calibration points.
Up to 10 calibration points can be stored to realize a multi-point calibration.

Add/Replace point is used to add a calibration point.
When a point is added with a value that already exists, the existing point will be replaced. When
a point is added with a new value, it will be stored as a new point.

Delete point is used to delete a calibration point.
Select the number of the calibration point (see Points) and confirm with Enter or the Apply
button. The calibration point will be deleted.