Penguin Computing Relion 2940 Technical Manual Download Page 78

Page: 78 / 119

Integrated Memory Controller (iMC)
Enforce POR

Enable to enforce POR restrictions for DDR4 frequency and voltage programming.

Options available: Enforce POR/Disabled/Enforce Stretch Goals. Default setting is Enforce POR.

Memory Frequency

Configure memory frequency.

Options available: Auto/1333/1400/1600/1800/1867/2000/2133.
Default setting is Auto.

ECC Support

Options available: Auto/Disabled/Enabled. Default setting is Auto.

Rank Margin Tool

Options available: Auto/Disabled/Enabled. Default setting is Auto.

RMT Pattern Length

Display RMT Pattern Length.

SPD Write Lock

Options available: Enabled/Disabled. Default setting is Enabled.

Memory Topology

Press [Enter] for configuration of advanced items.

Memory Thermal

Press [Enter] for configuration of advanced items.

Memory Map

Press [Enter] for configuration of advanced items.

BIOS Setup

- 78 -

Relion 2940 Chassis Manual

5-3-5 Memory Configuration

Summary of Contents for Relion 2940
























































































































Search results

Summary of Contents for Relion 2940

Reviews:

Related manuals for Relion 2940

Brands by name

Popular brands

Penguin Computing Relion 2940, Technical Manual

Search results

Summary of Contents for Relion 2940

Reviews:

Related manuals for Relion 2940

Brands by name

Popular brands