Penguin Computing Relion 2940 Technical Manual Download Page 55

Page: 55 / 119

- 55 -

BIOS Setup

Relion 2940 Chassis Manual

5-2-4 CSM Configuration

Compatibility Support Module Configuration
CSM Support

Enable/Disable Compatibility Support Module (CSM) support.

Options available: Enabled/Disabled. Default setting is Enabled.

CSM16 Module Version

Display CSM Module version information.

Gate20 Active

Upon Request: GA20 can be disabled using BIOS services.

Always: Do not allow disabling GA20; this option is useful when any RT code is executed above 1MB.

Options available: Upon Request/Always. Default setting is Upon Request.

Option ROM Messages

Option ROM Messages.

Options available: Force BIOS/Keep Current. Default setting is Force BIOS.

INT19 Endless Retry

Enabled: Allowed headless retry boot

Options available: Enabled/Disabled. Default setting is Enabled.

Boot option filter

Determines which devices system will boot to.

Options available: UEFI and Legacy/Legacy only/UEFI only. Default setting is UEFI and Legacy.

Summary of Contents for Relion 2940
























































































































Search results

Summary of Contents for Relion 2940

Reviews:

Related manuals for Relion 2940

Brands by name

Popular brands

Penguin Computing Relion 2940, Technical Manual

Search results

Summary of Contents for Relion 2940

Reviews:

Related manuals for Relion 2940

Brands by name

Popular brands