Penguin Computing Relion 2804e, Technical Manual, Page: 43 / 87

Hardware Installations and Upgrades
30 Intel
®
Server System R2000LH2/LT2 Service Guide
3. Remove the power supply modules. For instructions, see Removing the Power Supply Module(s) .
4. Remove the PCI riser assemblies. For instructions, see Removing the PCI Riser Assembly .
5. Remove the air duct. For instructions, see Removing the Air Duct .
6. Remove the processor heatsink(s). For instructions, see Removing Processor Heatsink(s) .
Installing the Processor
1. Remove the cover as shown. Save the protective cover.
Figure 41. Installing Processor
–
Remove the Cover
2. Open the Socket Lever. Push down the lever handle on the OPEN first side and away from the
socket to release it (see letter A ). Repeat the steps to release the lever on the other side (see
letter B ).
Figure 42. Installing Processor
–
Open the Socket Lever
3. Open the Load Plate. Press the locking lever slightly to raise the load plate (see letter A ). Open
the load plate all the way (see letter B ).
Figure 43. Installing Processor
–
Open the Load Plate
4. Install the Processor. Take the processor out of the box and remove the protective shipping
cover (see letter
A
). Orient the processor with the socket so that the processor cutouts match the
four orientation posts on the socket (see letter B ). Note location of gold key at corner of
processor (see letter
C
).