Server System Features
10
Intel
®
Server System R2000LH2/LT2 Service Guide
Slimline Optical Drive Carrier
The slimline optical drive carrier can be used with a single slimline optical drive. One slimline
carrier is included with your server system; the optical drive must be purchased separately.
The drive in the optical drive carrier is NOT hot-swappable. The system power must be turned off to
insert or remove the slimline optical drive carrier. For instructions on installing an optical drive, see
Installing and Removing a Slimline Optical Drive
.
To use one of the drives provided by Intel
®
, use the following order codes:
Slimline DVD-ROM Drive: AXXSATADVDROM
Slimline DVD-RW Drive: AXXSATADVDRWROM
Note:
For a complete list of supported peripherals, go to
http://serverconfigurator.intel.com/sct_app.aspx
.
Bezel
The front bezel is available as optional accessory for the server system:
Figure 10. Front Bezel (Front View)
Hot-Swap SAS/SATA Backplane
The Hot-Swap SAS/SATA backplane serves as an interface between the mother board and the
system drives. The following diagrams show the location for each connector found on
the backplane.
4 x 3.5
"
Hard Drive Backplane
A
SAS/SATA Hot-swap Connectors
Figure 11. 4 x 3.5-inch Hard Drive Backplane Components (Front View)
