Hardware Operations
1230B0026701
2-8
Place the PnP cap onto the load plate.
Figure 2-10 Placing on the PnP Cap
2.4.4 To install the processor
Reverse the steps above to install the processor. However, when inserting the processor into the socket,
make sure that the golden corner on the processor is aimed at the socket as picture shows:
Figure 2-11 Aiming the Golden Corner at the Socket
When the processor is in place, press it firmly on the socket while you push down the
socket lever to secure the processor. The lever clicks on the socket indicating that it is
locked.
The processor fits only in one orientation. Do not force the processor into the socket to
avoid bending the pins and damaging the processor. If the processor does not fit
completely, check its orientation or check for bent pins.
