PenBits PK017 Assembly Instructions Manual Download Page 21 | Manualshive

Page: 21 / 66

PenBits PK017 Assembly Instructions Manual Download Page 21

Fit one of the Spacers over the Seat etches,
applying flux to all adjacent surfaces.

Place the Mainframe over the secondary seat
assembly. Apply flux to all surfaces and hold

the  laminations  firmly  together,  pushing  it  up
against  the  fence  to  ensure  the  Secondary  Seat
etches are fully home in their slot. Check that the
bottom edges  of  the  components  are  aligned  with
the  bottom  edge  of  the  Mainframe,  and  solder  up
the assembly.

Repeat for the Outer Ears and Secondary Seat
on the other side of the Mainframe.

Remove the Pony Axle (S5) and Pony Lower
Axle (S8) etches from the fret.

Check that the main bodies of the wheel
bearings will pass through the holes in the Axle

and between the legs of the Lower Axle, filing the
etches as required.

Fold up the Axle and Lower Axle etches.

Bachmann Co1 Bogies: Subframes

21/65

(c) PenBits Model Railways, All Rights Reserved

27/09/2021

«
...
19
20
21
22
23
...
»

Summary of Contents for PK017



































































Reviews:

No comments