Pella Insynctive Lifestyle Series Product Manual Download Page 3

Page: 3 / 16

Pella

Lifestyle Series Motorized, Integrated Blinds and Shades with Insynctive | 3

NEED HELP?

For instant access to warranties, troubleshooting information and videos, visit

Pella.CustHelp.com

or call

855-473-5524

HAVE A HOME AUTOMATION SYSTEM?

To view a list of compatible systems and contact your home automation provider for further

information, visit

ConnectPella.com

WARNINGS

Failure to adhere to the warnings below may result in death, serious injury and/or loss of valuables.

• Pella

BLINDS and SHADES with Insynctive

technology are not 100% reliable for a variety

of reasons. For example, BLINDS and SHADES with Insynctive technology:

— communicate data wirelessly, and wireless data is susceptible to interference or failure.

— require proper installation.

— require a battery with an adequate charge.

— may be damaged after installation.

Therefore, Pella Insynctive products should not be relied upon in situations where life, safety,

and/or protection of valuables are solely dependent on their function. Test each product at least

once per year to help ensure proper operation.

• Pella Insynctive products are not a substitute for careful adult supervision of children.

• Keep battery and other small parts out of reach of children. If small parts are swallowed,

immediately seek medical help.

• Batteries carry the risk of fire, explosion and burns. Do not disassemble or incinerate.

General and Safety Information

Summary of Contents for Insynctive Lifestyle Series

















Search results

Summary of Contents for Insynctive Lifestyle Series

Reviews:

Related manuals for Insynctive Lifestyle Series

Brands by name

Popular brands

Pella Insynctive Lifestyle Series, Product Manual

Search results

Summary of Contents for Insynctive Lifestyle Series

Reviews:

Related manuals for Insynctive Lifestyle Series

Brands by name

Popular brands