Pella Insynctive Lifestyle Series Product Manual Download Page 15

Page: 15 / 16

Pella

Lifestyle Series Motorized, Integrated Blinds and Shades with Insynctive | 15

Inductive Charging Instructions (continued)

LED COLOR INDICATORS ON TRANSMITTER

Green Light - Good

• Indicates the transmitter is properly powered, on.
• Indicates battery charging is complete when attached to receiver.

Blue Light - Good

• Indicates the receiver and transmitter are properly aligned.
• Indicates inductive charger is currently charging battery.

Red Light – Error Code

• RED light is an error or warning indicator of 2 possible types:

• The wrong wall adapter is being used, or there is an issue with

the power source itself (Voltage is too high, low)

• LED will blink RED (pattern: Blink, Blink, Off)

• The charger is too hot, remove transmitter

• LED will blink RED (pattern: On, Off)

Yellow Light – Error Code

• Indicates the transmitter is properly powered, but not optimally aligned with

the receiver.

• Readjust the transmitter until the LED turns BLUE.

If you have any questions or issues regarding your Pella Insynctive inductive charging

system for motorized blinds and shades, or any other Pella product please reach out

to our Customer Service at 855-473-5524.

Green Light - Good

Blue Light - Good

Red Light - Error Code

Yellow Light - Error Code

Summary of Contents for Insynctive Lifestyle Series

















Search results

Summary of Contents for Insynctive Lifestyle Series

Reviews:

Related manuals for Insynctive Lifestyle Series

Brands by name

Popular brands

Pella Insynctive Lifestyle Series, Product Manual

Search results

Summary of Contents for Insynctive Lifestyle Series

Reviews:

Related manuals for Insynctive Lifestyle Series

Brands by name

Popular brands