PELLA
®
INSYNCTIVE
™
BRIDGE PRODUCT GUIDE
|
10
INSTALLATION RECOMMENDATIONS
WITHOUT HOME AUTOMATION (STAND-ALONE MODE):
Locate in area where chime can be heard.
WITH HOME AUTOMATION:
Locate in same room as the home automation system.
HOW TO FIND PRODUCT MANUFACTURER’S CODE
Each Insynctive
™
product contains a label with a Manufacturer’s
Code that will be required to help Pella Customer Service identify
the product if service is required. To locate the Manufacturer’s
Code for BRIDGE, remove the battery cover. The label is located on
the interior of the Bridge.
CARE AND MAINTENANCE
• Use indoors and keep away from sources of water and moisture.
• Test Insynctive products at least once per year to help ensure
proper operation.
INSTALLING OR REPLACING BACKUP BATTERY (OPTIONAL)
See
Insynctive.Pella.com/Support
for how-to videos.
A backup battery (Motorola BP6X 3.7V lithium ion polymer
rechargeable battery) may be purchased separately to maintain
power to BRIDGE during power outages. To install battery,
remove battery cover. Install battery as shown.
BRIDGE backup battery is charging when plugged into an outlet
and there is power to the outlet. Battery life of backup battery is
expected to be 4 – 6 hours maximum when the power is out within
the home.
Backup battery also allows you to unplug BRIDGE and move
throughout the home during setup or while testing device.
WARNING:
Batteries carry the risk of fire, explosion and burns.
Do not disassemble or incinerate.
IMPORTANT NOTES:
— Previously synced Insynctive products do not need to be
resynced after loss of power or battery change.
— Properly dispose of used batteries based on your local
requirements. A best practice is to dispose of batteries at
your local home chemical collection center.
ADDITIONAL INSTRUCTIONS
(continued)
BATTERY
MANUFACTURER’S
CODE INSIDE
BATTERY COVER
BATTERY