EN 9
Pan detection
If the hob does not detect a (ferrous) pan after the cooking power has
been set, the pan detection symbol and the selected power setting will
flash alternately in the display and the hob will remain cold. If a (ferrous)
pan is not placed on the cooking zone within 1 minute, the cooking
zone will automatically switch off.
Residual warmth indicator
A cooking zone that has been used intensively will retain heat for
several minutes after it has been switched off. An ‘H.’ appears in the
display as long as the cooking zone is hot.
Boost
The ‘Boost’ function is used to cook at maximum power for a short
period of time (maximum 10 minutes). The power is reduced to setting 9
at the end of the maximum boost time.
Switching on the boost function
The hob is switched on and a pan is on a cooking zone.
• Touch and slide your finger (to the right) over the multi slider of the
desired cooking zone to choose the boost setting. (You can also
use the multi slider if the power has already been set).
The display shows ‘P.’. The boost function is immediately active.
Switching off the boost function
The boost function is switched on, the display shows ‘P.’.
• Touch and slide your finger (to the left) over the multi slider of the
desired cooking zone to set a lower level.
OPERATION
