10
maintenance/installation
Cleaning the appliance
n
Clean the appliance daily with water and
a detergent or all purpose cleaner. Avoid
using too much water to prevent it entering
the burner or ventilation openings.
n
Remove stubborn stains on enamel with a
non-abrasive cream or a soft sponge.
Never use
scouring powders, aggressive
cleaning agents, green scours.
n
Remove stubborn stains on stainless steel
with 3M cleaner for stainless steel or a
non-scouring sponge. These sponges can
be recognised by their white surface e.g.
Scotch Brite no. 373.
n
Green scours contain scouring agents
which can scratch stainless steel. The
structure of the stainless surface is
such that (shiny) spots may appear after
polishing or scouring.
This damage is not covered by the
guarantee.
Note:
Do not drop hot burner caps in cold water.
Because of the strong cooling they might get
damaged.
Installation
General
The fitting of the appliance should only be
carried out by a registered Corgi gas fitter.
Warning:
This appliance is not connected to a flue; take
extra care with the ventilation of the kitchen.
Electrical connection
230 V - 50 Hz.
n
The electrical connection must comply
with national and local regulations.
n
Wall socket and plug must be accessible at
all times.
Gasconnection RC 1/2ý
(ISO 7/1-RC 1/2)
n
The gas connection must comply with
national and local regulations. Amongst
other things these regulations instruct that:
– only approved materials are to be used.
Please note:
The type of gas and the country for which the
appliance has been designed are indicated on
the ratings plate.
700003288000_GK299.indd 10
30-11-2009 14:26:44
