Assembly of accessories
Problem
Possible Cause
Solution
The device does not heat up.(In
the ON position, the power
switch does not light.)
1. The device is not connected.
2. The device is damaged
1. Check the plug/socket.
2. Disconnect and contact tech-
nical support.
The unit does not heat up. (The
light does not come on and the
power switch is on).
1. The steam cleaner is empty.
2. Tartar has accumilated in the
water tank.
3. The device is damaged.
1. Add water by following the
instructions in this manual.
2. Clean the tank by following
the in this manual.
3. Disconnect and contact tech-
nical support.
The steam flow is irregular, the
appliance ”coughs”
1. First use after filling the tank.
2. The level is low.
3. The steam hose is bent/folded.
4. Tartar is accumultated in the
tank.
1. Release the condensed water
by pressing the steam trigger(3).
2. Add water by following the
instructions.
3.Tighten the hose.
4. Clean the tank according to
the instructions.
Water comes out of the access-
ories or the head and the broom,
but no steam.
1. Steam condensed in the hose.
2. The water has not heated eno-
ugh.
3. The water tank is too full.
1. Direct the tip towards the
bucket and upload.
2. Wait or the rise of steam
pressure.
3. Turn of the power, allow the
unit to cool down and drain the
water from the tank.
Steam cleaner generates a large
amount of steam that can
condense water in the hose
and the extension tubs after a
cooling period or of use of the
device.
Empty the water by operating
the steam trigger over a bucket
or sink.
The broom head does not stay
attached on the extension tubes.
1. The adapter (22) is not inserted in
the button of the tubes.
1. Make sure that the spring bot-
tun is fully engaged in the hole in
the tip.
The handle (1) becomes hot.
1. The hot steam passes through
the handle, it warms up.
1. In case of discomfort, you can
use a glove.
Troubleshooting
