pela tools 506475, Manual

Page: 26 / 32

Maintenance
A simple maintenance makes the lift work reliably
and last longer. How often you service your lift is
up to you and it is governed by how much you use
it. However, we recommend that you do this at
least once a year.
Daily check - before use.
The user must perform daily checks. Daily
inspection of the safety catches is extremely
important. Detecting a possible fault before use
prevents injuries and accidents.
• Check all hoses and connections for leaks.
• Check electrical connections. Make sure they
are in good condition.
• Before use, check that the catches work - you
can hear them falling into the sockets of the
bars when the lifting arms are raised.
• Lower the lift to the lowest position and switch
off the power when the lift is not in use.
Weekly check
• Check the flexibility of moving parts.
• Check the function for safety details.
• Check the oil level in the tank, it is correct if the
sled goes up in its highest position. If there is
too little oil - top up.
Monthly check
• Check that the expander bolts are properly
tightened.
• Check wear and aging of all hoses and
connections.
• Check wear and lubrication on all moving parts
- replace worn parts in time. So there are no
malfunctions.
Annual check
• Drain the hydraulic oil.
• Clean the tank and the oil filter.
• Top up with new oil (VG32).
If the lift is not to be used for a longer period
of time, the following shall be:
1. The power cord is unplugged from the wall
outlet.
2. The oil tank is emptied.
3. Lubricate moving parts with hydraulic oil.
Important: Think about environmental
protection and dispose of used oil in a
suitable way to a recycling center.
A. Upper wire wheels
B. The carriage axle
C. Lifting washer
D. Lifting arm
E Lift arm
F. Lower rope wheels
G. Sprocket
H. Wagon