pela tools 506475, Manual

Page: 25 / 32

Description of control box
A. Main switch
B. Current indicator
C. Up, raising the lift
D. Emergency stop switch
Flow chart for use
User instructions
Raise the lift
1. Make sure you read and understand how the lift
works.
2. Park the car between the pillars.
3. Adjust the lifting arms to fit the car’s lifting
points - check that the center of gravity is in the
middle of the four arms.
4. Turn on the power and make sure you lift
according to the instructions.
5. Press the up button until the rubber cushions
on the lifting arms touch the car’s lifting points -
check that they lift in the right places.
6. Lift the car half a meter and check that the car
is in a safe position.
7. Raise the car to the desired height - push down
the lowering valve so that the lifting arms rest
on the safety lugs.
8. Turn off the main power.
Lower the lift
1. Turn on the main power.
2. Raise by pressing the button up (approx. 5cm).
3. Release the locks by pushing in the two wires
that are in each lifting carriage.
4. Lower the lift by pushing down the lowering
valve.
5. After lowering the arms to the lowest position,
fold them away so that they are horizontal with
the pillars.
6. Drive the car off the lift.