Peiker Acustic BTHFCK-xxx, User Manual

Page: 18 / 20

BTHFCK User’s Guide Revision: A Page 1
1
1
8
8
8
Call Waiting and Conference Calling
If you have a second call coming in while you are already carrying on a conversation, you have the following options:
(1) Switch to the Incoming Call While Placing Existing Call on Hold
[
press the EINBETTENHook button longer than 1.5 seconds
[
existing call will be placed on hold and incoming call will be answered
[
to switch back and forth, press the EINBETTENHook button for longer than 1,5seconds again
(2) Terminate Current Call and Switch to Incoming Call
[
press and hold the EINBETTENHook button (shorter than 1.5 seconds)
[
existing call will be placed on terminated and incoming call will be answered
(3) Connect Both Calls for a 3-Party Conference
[
EINBETTENuse the “barge-In” command: “ conference ”. See section Barge-In.
Barge-In – Voice Mail, Initiate Second Call, etc.
During an active call, it is sometimes necessary to have the system send digits over the cellular connection in order to
activate a particular feature that you may be trying to access on the landline side. An example of this would be when
you dial in to your voice mail and need to send your password. Also, you may wish to dial a second call while
continuing to keep the first call on hold.
In order to do this you must activate the ‘Barge-In’ feature of the kit using the following procedure:
(1) During your current call, press the EINBETTENVR button.
[
BEEP
[
VR system is now active with these options:
a) Transfer Call
b) Dial
c) Call
d) New Call
e) Conference
(2) Select one of the options by speaking the command
a) “TRANSFER CALL”
[
‘Audio Transferred’
[
audio will be transferred between handsfree and phone
b) “DIAL”
[
refer to Dial command earlier in guide.
 The entered number will be sent via DTMF-Tones in the line
c) “CALL”
[
refer to Call command earlier in guide
 The stores number will be sent via DTMF-Tones in the line
d) “NEW CALL”
[
‘New Call. Dial or Call?’ BEEP
[
say either “DIAL” or “CALL” and then follow the
command sequence as defined earlier
[
a second call will be placed and the original call will be placed on hold
e) “conference” : A call on hold or a second incoming call will put together in a conference call
 a short press to hook-button will terminate the conference call, a long press puts the
conference on hold – the two other caller will not hear you anymore.