Peiker Acustic BTHFCK-xxx, User Manual

Page: 10 / 20

BTHFCK User’s Guide Revision: A Page 1
1
1
0
0
0
ƒ SETUP
ƒ EMERGENCY
ƒ TOWING ASSISTANCE
To access one of these features, simply speak the desired function name and the kit will respond appropriately.
A single BEEP will be heard after most prompts coming from the system. This signifies that the Voice Recognition is
now ready to accept input from the user.
 YOU MUST WAIT for the BEEP before SPEAKING a COMMAND or NUMBER.
If you do not speak a command within 2 seconds of the BEEP, the kit will prompt you with the above menu of features:
‘Dial’, ‘Redial’, ‘Call’, ‘Phonebook’, Setup’, ‘Emergency’, ‘ or Towing Assistance’
Again you can select one of the features by speaking the function name. It will repeat this process two more times at
which time, the kit will time out with
a ‘DOUBLE-BEEP’ . To start over, just follow the same steps as before.
Dial
The DIAL function is used to dial a phone number by providing the kit with a series of digits. You can enter the
number as either a complete string of 7,10 or more digits or you can break up the phone number into segments and the
system will piece them all together before dialling.
Press EINBETTENHook
[
‘Ready’ BEEP
[
Say “Dial”
[
‘Number Please’ BEEP
[
n Speak the phone number you wish
to dial, using individual digits. Either the complete number (e.g. 8 0 0 1 2 3 4 5 6 7) or any segment of the number (e.g.
8 0 0) can be stated
[
number is repeated back by system (e.g. ‘8 0 0 1 2 3 4 5 6 7’ ) + ‘Complete the number, say dial or
say clear’ BEEP
[
<number>: say a further block of numbers
[
“ clear ”
[
deletes the last entered block of numbers
[
if number is complete, say “Dial”
[
if you only entered one block
[
‘Dialling’
[
Number will be dialled through phone and
call will be connected over handsfree system
[
Exit from VR.
[
if you entered multiple segments
[
‘Dialling’ + complete number that was e ‘Is
this correct?’ BEEP
[
“YES”
[
Number will be dialled through phone and call will be connected over
handsfree system
[
Exit from VR.
[
“NO”
[
BEEP
[
complete number will be erased and start again at n above.
[
if number is not complete, then continue at n above.
[
“cancel”
[
returns to main-menu
 If you make no choice after prompt, the system will repeat all entered blocks of numbers, after each block a short
break is added. The system is able to store up to nine blocks. If you enter more blocks, the both oldest are put
together to one. In this way you can enter up to 20 digits. After three times without making a choice, the system
will leave the menu-tree.