Chapter. 3
– Technical Characteristics
DIN NANO FSC
Page 5
USER AND MAINTENANCE MANUAL
Rev. 03-18
GENERAL RULES FOR THE INSTALLER
1. Install the device in an area that ensures the correct degree of protection, and take all
due care when drilling holes in the box for the cable glands and/or hoses;
2. Avoid using multi-pole cables with conductors connected to inductive and power
conductors and signal conductors like probes and digital inputs;
3. Avoid inserting ducts and power cables with signal cables (sensors and digital inputs) in
these.
4. Minimize the length of the connecting cables to prevent these from coiling up and
adversely affecting the electronics through induction;
5. All the conductors of the cables must be of an appropriate size to withstand the required
load;
6. When extensions are needed for the sensors, it is necessary to use conductors of a
suitable size measuring no less than 1mm². Extension or shortening of the probes may
alter the factory settings; use an external thermometer, therefore, for testing and
calibration.
STANDARD EQUIPMENT FOR ASSEMBLY AND USE
The DIN NANO FSC electronic controller is provided with the following for assembly and
use:
• Nr 1 User manual.
2.1
2.2
CHAPTER 2: INSTALLATION
