DIN NANO FSC
Chapter 5
– Data Programming
USER AND MAINTENANCE MANUAL
Rev. 03-18
Page 10
DISPLAY LED
(5)
Shows the values / parameters
(6)
"OUTPUT Nr
.1” ICON
ON=analogue output between 0.1 and 3.3V.
(7)
"OUTPUT Nr.2" ICON
ON=analogue output between 3.4 and 6.6V.
(8)
"OUTPUT Nr.3" ICON
ON = analogue output > 6.6V.
(9)
"PRG" ICON
Flashing LED = Programming (or SET POINT change)
(10)
---
(11)
"CONDENSER FAN CONTROL" ICON
LED ON = Condenser Fan Control ENABLED
(12)
"UNIT OF MEASURE IN DEGREES CELSIUS" ICON
LED ON = Unit of measure in degrees Celsius of the viewed value.
(13)
"UNIT OF MEASUREMENT IN BAR" ICON
LED ON = Unit of measure in Bar of the viewed value.
(14)
ALARM IN PROGRESS ICON
LED OFF = No alarm triggered
LED ON = Alarm triggered and then cancelled
Blinking LED = Alarm in progress
5.3
