Chapter. 6
– Options
DIN NANO FSC
Page 11
USER AND MAINTENANCE MANUAL
Rev. 03-18
COMBINATION OF KEYS
+
LEVEL 1 PROGRAMMING
Pressing both keys together for more than 3 seconds
enables access to the Level 1 programming menu.
EXIT PROGRAMMING
Pressing both keys together for more than 3 seconds in
any programming menu exits the menu concerned.
+
+
LEVEL 2 PROGRAMMING
Pressing all keys together for more than 3 seconds
enables access to the Level 2 programming menu.
To exit the menu, press the up and down arrow keys
together.
+
LEVEL 3 PROGRAMMING
Pressing both keys together for more than 3 seconds
enables access to the Level 3 programming menu.
To exit the menu, press the up and down arrow keys
together.
pressed
+
SWITCHING FROM Bar to °C WHILE
VIEWING THE VALUE OF THE FOLLOWING
VARIABLES IN Bar
, if Pt=0.
The variables involved with this kind of view are:
SET POINT, r0, LSE, HSE, A1, A2, iOv, nSC
.
When displaying the value contained in one of the variables
listed above, pressing the stand-by key switches the view from
Bar to °C according to the table of the gas type selected until
the keys are released.
5.4
