VISION SC600
Pag. 13
Rev. 02-18
USE AND MAINTENANCE MANUAL
+
SWITCHING FROM Bar to °C
While viewing several variables in Bar, pressing the
stand-by key and Set together
switches the view from
Bar to °C according to the table of the gas type selected
until the keys are released.
The variables involved with this kind of view are:
-
Setpoint compressors, r0C, LSC, HSC.
-
Setpoint fans, r0V, LSU, HSU.
LCD DISPLAY
1.
Intake sensor reading (low pressure) / parameters
At night operation decimal point flashes.
2.
Delivery sensor reading (high pressure) / parameters values /
Error code
3.
Time / time parameters value
4.
PRG
Programming mode
(the control is in the programming phase)
5.
Compressors call
(compressor call signaling)
6.
Fans call
(fans call signaling)
7.
Alarm
CHAP. 5 - Data programming
5.4