9
• Only operate the axial press with pressing heads fully inserted.
Failure to do so could lead
to fracture and flying parts can cause serious injuries.
• Always screw expanding heads as far as they will go onto the expander.
Failure to do so
could lead to fracture and flying parts can cause serious injuries.
• Use only undamaged pressing tongs, Mini pressing tongs, pressing rings, adapter tongs,
pressing heads and expanding heads.
Damaged pressing tongs, Mini pressing tongs,
pressing rings, adapter tongs, pressing heads and expanding heads can jam or fracture and/
or the press fitting will be faulty. Do not attempt to repair damaged pressing tongs, Mini
pressing tongs, pressing rings, adapter tongs, pressing heads and expanding heads. Failure
to do so could lead to fracture and flying parts can cause serious injuries.
• Pull out the plug or remove the battery before assembly/disassembly of pressing tongs,
Mini pressing tongs, pressing rings, adapter tongs, pressing heads and expanding
heads.
There is a risk of injury.
• Comply with the maintenance regulations for the power tool and follow the
maintenance instructions for pressing tongs, Mini pressing tongs, pressing rings,
adapter tongs, pressing heads and expanding heads.
Following the maintenance
instructions has a positive effect on the life of the power tool, the pressing tongs, Mini
pressing tongs, pressing rings, adapter tongs, pressing heads and widening heads.
• Check the connecting cable and extension leads of the power tool regularly for damage.
Have these renewed by qualified experts or an authorised REMS customer service workshop
in case of damage.
• Only allow trained persons to use the power tool.
Apprentices may only use the power
tool when they are over 16, when this is necessary for their training and when they are
supervised by a trained operative.
• Children and persons who, due to their physical, sensory or mental abilities or lack of
experience and knowledge are unable to operate the power tool safely may not use this
power tool without supervision or instruction by a responsible person.
Otherwise there is
a risk of injury due to false operation.
• Only use approved and appropriately marked extension leads with a sufficient cable
cross-section.
Use extension leads up to a length of 10 m with cable cross-section 1.5 mm²,
from 10 – 30 m with cable cross-section 2.5 mm².
Safety Instructions for batteries
Read all the safety notes, instructions, illustrations and technical data which come with
this power tool.
Failure to heed the following instructions can lead to electric shock, fire and/or
severe injuries.
Save all warnings and instructions for future reference.
• Only use the battery in REMS power tools.
Only then is the battery safe from dangerous
overloading.