Pegler Yorkshire REMS Mini-Press ACC Manual Download Page 22

22

Replaced products and parts shall become the property of REMS.
The user shall be responsible for the cost of shipping and returning the product.
The legal rights of the user, in particular the right to make claims against the seller under the 
warranty terms, shall not be affected. This manufacturer’s warranty only applies for new products 
which are purchased in the European Union, in Norway or in Switzerland.
This warranty is subject to German law with the exclusion of the United Nations Convention on 
Contracts for the International Sales of Goods (CISG).

8. Extension of the manufacturer’s guarantee to 5 years

For the drive units listed in these operating instructions it is possible to extend the guarantee time 
of the above manufacturer guarantee to 5 years by registering the drive unit under www.rems.de/
service within 30 days of handover to the first user. Claims from the extension of the manufacturer 
guarantee can only be made by the registered first users on condition that the rating plate on the
drive unit is not removed or changed and the data are legible. Cession of the claims is excluded.

9.Spare parts list

For spare parts lists, see www.rems.de > Downloads > Parts lists. 
 

EC Declaration of Conformity

We declare under our sole responsibility that the product described under „Technical Data“ is in 
conformity with the standards below mentioned following the provisions of Directives 2004/108/
EC, 2006/42/EC.

EN 50366:2003 + A1:2006,  
EN 55014-1:2006 + A1:2009 + A2:2011,  
EN 55014-2:1997 + A1:2001 + A2:2008,  
EN 60745-1:2009 + A11:2010,  
EN 61000-3-2:2006 + A1:2009 + A2:2009,  
EN 61000-3-3:2008, EN 62233:2008.

Summary of Contents for REMS Mini-Press ACC

























Reviews: