Pegler Yorkshire REMS Mini-Press ACC Manual Download Page 21

21

5.8. Fault: 

Expander does not complete the expanding, expanding head does not  

 

open fully.

Cause:

•  Drive unit overheated (REMS Power-Ex- 
  Press Q & E ACC).  
•  Worn carbon brushes (REMS Power-Ex- 
  Press Q & E ACC).  
 
 
•  Battery depleted or defective (REMS  
  cordless drive units).  
•  Drive unit defective.  
 
 
•  Wrong expanding head (press fitting  
  system, size) inserted.  
•  Expanding head stiff or defective.  
 
 
•  Expander set incorrectly (REMS Akku-Ex- 
  Press Cu ACC).  
•  Distance from the press fitting to the  
  expanding head too small. 

Remedy:

•  Let the drive unit cool down for about 10  
 minutes.
•  Have the carbon brushes or DC motor  
  changed by qualified personnel or an
  authorised REMS customer service  
 workshop.
•  Charge the battery with the Li-Ion/Ni-Cd  
  rapid charger or change the battery.
•  Have the drive unit checked/repaired by an  
  authorised REMS customer service 
 workshop.
•  Change expanding head. 

•  Do not use the expanding head anymore!  
  Clean the expanding head and grease  
  lightly with machine oil or change.
•  Reset the expander, see 2.5. 

•  Increase the distance between the press  
  fitting and the expanding head.

6. Disposal

The drive units, batteries and rapid chargers may not be thrown in the household waste when they 
are finished with. They must be disposed of properly by law. 

7. Manufacturer’s Warranty

The warranty period shall be 12 months from delivery of the new product to the first user. The date 
of delivery shall be documented by the submission of the original purchase documents, which 
must include the date of purchase and the designation of the product. All functional defects 
occurring within the warranty period, which are clearly the consequence of defects in production 
or materials, will be remedied free of charge. The remedy of defects shall not extend or renew the 
warranty period for the product. Damage attributable to natural wear and tear, incorrect treatment 
or misuse, failure to observe the operational instructions, unsuitable operating materials,  
excessive demand, use for unauthorized purposes, interventions by the customer or a third party 
or other reasons, for which REMS is not responsible, shall be excluded from the warranty.
Services under the warranty may only be provided by customer service stations authorized for 
this purpose by REMS. Complaints will only be accepted if the product is returned to a customer 
service station authorized by REMS without prior interference in an unassembled condition.

Summary of Contents for REMS Mini-Press ACC

























Reviews: