17
4.1. Inspection/repair
Before any repair work, pull the mains plug or remove the battery!
This work may only be
performed by qualified personnel.
The gearbox of the drive unit in the REMS Power-Press SE is maintenance-free. They operate in a
permanent grease filling and therefore require no lubrication. The motor of the REMS Power-Press
SE, REMS Power-Press, REMS Power-Press ACC and REMS Power-Ex-Press Q & E ACC has carbon
brushes. These are subject to wear and must therefore be inspected or replaced from time to
time. Only use genuine REMS carbon brushes. The REMS Power-Press SE drive unit has a safety
slip clutch. This is subject to wear and must therefore be checked and renewed from time to time.
Use only an original REMS safety slip clutch. In the battery-operated drive units, the carbon
brushes of the motor are subject to wear. These cannot be replaced; the DC motor must be
replaced. The sealing rings (O-rings) wear in all electro-hydraulic drive units. These must therefore
be checked and renewed from time to time. If the pressing power is insufficient or oil is lost, the
drive unit must be inspected and if necessary repaired by an authorised REMS after-sales service
facility.
Damaged or worn pressing tongs, pressing tongs Mini, pressing rings, adapter tongs, pressing
heads or expanding heads cannot be repaired.
4.2. Servicing
Before service work, pull the mains plug or remove the battery!
Keep the pressing tongs, pressing tongs Mini, pressing rings, adapter tongs, adapter tongs Mini
pressing heads and expandin , and particularly their receptacles, clean. Clean heavily soiled metal
parts with the REMS CleanM (Art. No. 140119) cleaner, for example, and then protect against rust.
Clean plastic parts (e.g. housing, batteries) only with the REMS CleanM (Art. No. 140119) or a mild
soap and a damp cloth. Do not use domestic cleaning agents. These frequently contain chemicals
that can attack plastic parts. On no account use petrol, turpentine oil, thinners or similar products
to clean plastic parts.
Make sure that liquids never get inside the power tool. Never immerse the power tool in liquid.
4.2.1. Pressing tongs, pressing tongs Mini, pressing rings, adapter tongs,
adapter tongs Mini
Pressing tongs, pressing tongs Mini, pressing rings, adapter tongs, adapter tongs Mini must be
checked regularly for smooth action. Clean pressing tongs, pressing tongs Mini, pressing rings
and adapter tongs, adapter tongs Mini if necessary and lightly grease the bolts of the
pressing jaws, pressing segments and adapter jaws, adapter tongs Mini with machine oil. Remove
deposits from the pressing contour. Check the proper functioning