4
1.4 Names of Camera Parts
a
b
6
Figure 1-1 Camera parts
1. Conduit hole used for surface run power/video connector
2. Bottom case
3. Camera housing
4. Dome cover
5. Focus lever
6. Zoom lever
a. AC 24V / DC 12V power input connector (red +, black -)
b. Video output connector
Note:
See Figure 2-3 for camera board controls.
1.5 Routine Maintenance
• The dome cover is an optical part. Use a soft, dry cloth to remove any fingerprints
or dust.
•
Clean the camera housing with a soft, dry cloth. For more stubborn stains, use a
cloth dampened with a small quantity of neutral detergent, then wipe dry.
Caution
: Do not use volatile solvents such as alcohol, benzene or thinners to avoid
damaging the surface finish.
INTRODUCTION
Summary of Contents for PDCHRDN-700AI
Page 2: ......
