Pegasus PDCHRDN-700AI, User Manual

Page: 14 / 16

12
OSD SETTINGS
3.6 ATR*
Set ATR (Adaptive Tone-curve Reproduction) function. You can select ON or OFF. The
default is OFF. If selecting ON, you will enter the ATR submenu, where you can set
LUMINACE and CONTRAST to optimize by image.
LUMINANCE LOW
CONTRAST LOW
*Also known as Wide Dynamic Range. This function expands the video dynamic range
of the camera and improves visibility of images even in high contrast environments.
3.7 MOTION DET
MOTION DET allows to detect moving objects on the screen. The default is OFF. If
selecting ON, you will enter the MOTION DET submenu. You can set up to 4 motion
areas to detect moving objectives and adjust the motion detection sensitivity from 0
to 127.
3.8 PRIVACY
PRIVACY function mask up to 8 privacy areas on the screen from video monitoring.
The default setting is OFF. If selecting ON, you will enter the PRIVACY submenu. You
can confi gure up to 8 privacy areas and set c olor and transparency of the privacy
zones. In addition, you can enable MOSAIC function for the privacy zone.
Note: If you enable MOTION DET function, then PRIVACY function will support 4
zones only.
REA SEL 1/8
TOP 000
BOTTOM 000
LEFT 000
RIGHT 000
COLOR 1
TRANSP 0.00
MOSAIC OFF
3.9 DAY/NIGHT
DAY/NIGHT function allows you to set how the camera switches between color and
black and white (B/W) mode. Options include AUTO, COLOR and B/W. The default
setting is AUTO.
•
AUTO: In the AUTO submenu, you can adjust BURST value and set:
-
Day->NIGHT: Set the light level at which the camera switches to NIGHT
mode. The higher the value, the darker the lighting must be there before the
camera switches.
-
NIGHT->DAY: Set the light level at which the camera switches to DAY mode.
The lower the value, the brighter the lighting must be there before the camera
switches.