6 Pegasus Astro – Copyright 2016
USB Connection
Unit has been designed with a USB type B connector. Plug one end into a spare USB
2.0 port on the computer or USB Hub, the other end into the USB type B receptacle
on the controller labeled USB.
Controller will be identified as “DMFC v3.x” and a serial port will be appeared to the
operating system.
Temperature Probe
The probe is an external temperature measurement device which is attached to the
controller. It comes with length of 1m cable. Probe measures temperatures from -55°C
to +125°C.
Accuracy of the probe is ±0.5°C from -10°C to +85°C. The controller detects the
presence of the probe and requests temperature readings at 30 sec intervals. When
using multiple controllers and probes, the reported temperature may differ slightly
between units due to small differences between individual sensor readouts.
This does not affect the operation of the units, as they respond to measured
temperature change, not to the actual temperature.
Please notice that you have to connect the temperature probe before you
power on the controller. If you connect it later you will have to wait for 1-3
minutes for probe recalibration.
