15 Pegasus Astro – Copyright 2016
Current Motor Position
Controller continuously (every 500 milisec) reports motor / focuser position. Reading can be
found in the following image:
Set A New Motor Position
You can easily specify a new motor position. Set the value and click “GO” button.
Motor will start moving to the new position you defined.
Emergency Motor Stop
Click the “STOP” yellow button and the motor will instantly stop. This can save you if you
specified a wrong position and the focuser is quickly extended reaching its limits.
Temperature of sensor
Existing environmental temperature of the sensor can be seen in the following reading.
Click the temperature and a graph which displays temperature over time will appear
You can easily check when was the last focus temperature so you can know exactly if it is
time to refocus.
