14 Pegasus Astro – Copyright 2016
Control Motor
From these buttons you will control the steps of the stepper motor or pulses from the DC
motor.
•
Set the “Step” to the value you want (bigger the step / pulse count, larger the
movement of the motor shaft)
You can also fast select the predefined values you specified in “Custom Rates”
•
Click once the “step number” button. This is how many steps the motor will move
forward (+ steps) or backwards (- steps).
Notice that “Position” indicator will change its value and will confirm your command
There are also two more buttons (<<< & >>>) that will forward / reverse accelerate the
motor. Keep mouse down and the motor will start accelerating to the director you clicked.
Use these buttons only if you need to quickly move in or out your focuser
In every motor movement, final position (when motor stops) is saved after 10 secs into
controller’s EEPROM memory. This will ensure that next time you power on the controller,
last saved position will be retrieved from its memory.