PEGAS-GONDA PEGAS 235, Manual Instructions

Page: 23 / 35

ISO 9001
PEGAS 235 AUTOMAT CNC - 23 - tel.-fax : 00420-544 221 125
tel.
PARAMETERS
Access to this menu is gained by pressing the keys + , and waiting a few seconds.
Access is ensured by the display showing . The parameters are listed on the display with
the no. followed by the relevant value.
r.xx Software release number
1 1.100 Vice-open time.
2 2.100 Vice-closed time.
3 3.YES Vice-open DOWN.
4 4.NO Motor off DOWN.
5 5.YES Bow DOWN at the end of cycle.
6 6.NO Simultaneous movements.
7 7.YES NO: 9PGM, 1STEP
YES: 1PGM 9STEP
To change the parameters press the ARROW keys.
To quit after saving the modified parameters press: + , or, otherwise, :
Test OF EQUIPMENT INPUTS/OUTPUTS
Not available
EMERGENCY CODES
The machine signals any failures on the 4-digit display according to the danger conditions or the
machine state. The elimination of an emergency condition can be performed using the key