PEGAS-GONDA PEGAS 235, Manual Instructions, Page: 18 / 35

ISO 9001
PEGAS 235 AUTOMAT CNC - 18 - tel.-fax : 00420-544 221 125
tel.
GENERAL INDEX
1. GENERAL FEATURES
2. SWITCHING ON
3. DISPLAY
4. CONTROLS ON KEYBOARD
5. SEMI-AUTOMATIC MODE
5.1. PIECECOUNTER
5.1.1. DECREASING PIECECOUNTER:
5.1.2. INCREASING PIECEOUNTER:
6. AUTOMATIC MODE (1P9M)
6.1. DELETION OF ALL DIMENSIONS
6.2. PROGRAM SETTING
6.3. PROGRAM EXECUTION
6.4. PIECECOUNTER RECHARGE
7. PARAMETERS
8. TEST OF EQUIPMENT INPUTS/OUTPUTS
9. EMERGENCY CODES
10. ELECTRICAL CONNECTIONS
11. OPERATION CRITERIA
GENERAL FEATURES
The SAWmicro /AUTO system has been designed to control automatic belt/disc sawing
machines and to manage one program with 9 different lengths or 9 programs of the same
length.
In order to control an Automatic machine it is necessary to have the SAWmicro board with
Expansion.
Therefore, the characteristics are the following:
Resource Description
System power supply 18Vac or 24Vac or 24 Vdc (of solenoid valves)
Data retention EEPROM for maintaining Set-up data
10 Inputs Optoinsulated PNP
–12V with internally generated power supply
10 Outputs Optoinsulated with n.o. relay 10A 24Vac/24Vdc
1 Encoder channel Optoinsulated Encoder Channel
Mechanical dimensions LxHxD 332L 217H mm (protection casing not included)/ as SAW2
Fastening method Wall-mounted with 6 screws on front panel
Connections Phoenix type connectors with screw fastening