Peg-Perego Viaggio 2-3 Sure Fix, Instructions For Use Manual

Page: 24 / 128

24
1_ IMPORTANT
• "Viaggio 2/3": this car seat, group
2/3, must be installed in the direction
of travel.
• Do not install “Viaggio 2/3” in an
opposite or transversal location as
compared to the direction of travel.
• It is always advisable to fit the child
seat on the rear seats and on the
passenger’s side.
• If the child seat is installed on the
front seat, it is advisable to place it as
far as possible from the dashboard.
If you experience problems during
the installation of Viaggio 2/3,
try lifting the headrest without
removing it.
2_ Components of the
product
Inspect the content of the package
and contact the Customer Care if
some items are missing.
_ The child car seat includes: 1
headrest (a), 1 backrest (b), 1 seat (c).
The product supplied in its original
packaging is ready for use and
does not require specific assembly
operations.
Features of the product
3
• Lift the backrest of the child seat
until you hear it click (Fig. A).
The backrest can move between the
two locks, as indicated in figure B.
4
• The headrest can be adjusted in 6
positions. Lift the handle on the rear
of the backrest and position it at the
desired height.
IMPORTANT: as the child
grows, it is necessary to adjust
the height according to the
stature of the child.
IMPORTANT: after completing
the operation, try moving the
headrest to verify that it is
correctly fitted in place.
5 • Viaggio2/3 is fitted with two lateral
and removable drink holders.
6 • Viaggio2/3 is fitted with a
reclination system that guarantees
maximum comfort. To recline the
seat, pull the handle on the front and
simultaneously lift the seat.
7 • If possible, recline the car’s
backrest while the child is asleep
and then recline the backrest of the
child seat to the same slant.
The Viaggio 2/3 backrest will adapt
to the slant of the car’s backrest,
guaranteeing greater comfort for
your child.
Fitting the child car seat
with the safety belts and
Surefix fittings
For cars fitted with Isofix
hooks
This method can be used only if the
car is fitted with Isofix hooks.
For further information on the
availability of these hooks and their
location, refer to the instruction
manual of the car.
Surefix fittings
guarantee a greater safety, but
cannot replace the function of
safety belts.
8
• To stretch the Surefix hooks, press
the button on the front inside the
bag, as shown in the figure, and
stretch them manually.
9
• Fix the Surefix connectors to the
Isofix hooks of the car seat, verifying
that they “click” in place (Arrow A).
Tension the belt and simultaneously
push the child car seat (Arrow B)
towards the backrest of the car seat
(Arrow C).
IMPORTANT:
after completing
the operation, try moving the seat
to verify that the Isofix fittings have
been correctly hooked to the Isofix
fittings .
10
• To detach the Surefix connectors
of the child car seat from the Isofix
hooks, press the button on the
front inside the bag and release
the connectors belts in order to be
able to manually detach them by
pressing the safety lever situated on
the hooks, as shown in the figure.
Fitting the child car seat
with the safety belts
For cars that are NOT
fitted with Isofix fittings
11
• Place Viaggio 2/3 on the car seat
in the direction of travel, as shown
in the figure, and place the child on
the seat.