background image

2 of 10

ISSUED: 09-30-11   SHEET #: 009-9056-5  (2014-04-08)

NOTE:

 Read entire instruction sheet before you start installation and assembly. 

Table of Contents

Parts List............................................................................................................................................................................ 3, 4

Assembling Stand...................................................................................................................................................................5

Installing Adapter Brackets to Flat Panel Display ...................................................................................................................7

Mounting Flat Panel Display ...................................................................................................................................................9

Cable Management ................................................................................................................................................................9

Tools Needed for Assembly

• phillips screwdriver

•  Do not begin to install your Peerless product until you have read and understood the instructions and warnings 

contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US 
customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact 
your local distributor.

•  This product should only be installed by someone of good mechanical aptitude, and fully understands 

these instructions.

•  Never exceed the Maximum UL Load Capacity on page 1. Use with heavier televisions may result in instability 

causing tip over resulting in death or serious injury.

•  Always use an assistant or mechanical lifting equipment to safely lift and position equipment.

• Tighten screws fi rmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding 

power.

•  The cart or stand is not affi xed or secured to the fl oor, and may therefore tip over and/or fall if screen and/or stand 

is shaken or hit. Not recommended for use in areas with heavy traffi c.

•  Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control 

or toys placed on the furnishing may encourage a child to climb on the furnishing resulting in the furnishing tipping 
over on to the child.

•  Relocating audio and/or video equipment from this cart or stand to furniture not specifi cally designed to support 

audio and/or video equipment may result in death or serious injury due to the furnishing collapsing or over turning 
onto a child.

•  This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal 

injury.

WARNING

Summary of Contents for SS560FK











Reviews: