background image

3

Hazardous 

Voltage Present

POWER REQUIREMENTS - 

P-2010-S

120 V.A.C. — 60 Hz, 1 ph
500 Watts, 4.1 Amps

Safety Class I Equipment
No Applied Parts

NEMA 5-15P
15A - 125V Plug
Hospital Grade

Trouble shooting for possible EMC interference

•   Main power quality should be that of a typical commercial 

or hospital environment

•   Power frequency magnetic fields should be at levels 

characteristic of a typical location in a commercial 
or hospital environment

D A N G E R

AT NO TIME SHOULD THE INTERIOR 
OR EXTERIOR BE STEAM CLEANED, 
HOSED DOWN, OR FLOODED WITH 
WATER OR LIQUID SOLUTION OF 
ANY KIND.  DO NOT USE WATER JET 
TO CLEAN.

SEVERE DAMAGE OR 

ELECTRICAL HAZARD 

COULD RESULT.

  

WARRANTY BECOMES VOID IF 

APPLIANCE IS FLOODED

    D A N G E R

ENSURE POWER SOURCE 
MATCHES VOLTAGE STAMPED 
ON APPLIANCE NAMEPLATE.

NOTE:  An electrical wiring diagram for this unit  

can be found in a sleeve on the bottom side  
of the top cover of the control.

Safety Class I

Equipment

Protective Earth

Ground Symbol

Medical Equipment classified by Underwriters 
Laboratories with Respect to Electrical Shock, 
Fire and Mechanical Hazards only, in Accordance 
with UL 60601-1 and CAN/CSA C22.2 No. 601.1.

UL File No.

E201645

Grounding reliability can only be achieved when equipment is  

connected to an equivalent receptacle marked “Hospital Grade.”

E L E C T R I C A L   I N F O R M A T I O N

The power specifications are located on the unit identification rating tag.  This tag is 
permanently attached to the unit and must be located to verify power requirements.

P R E P A R A T I O N

Before operating the cabinet, clean both the interior and exterior of the unit with a damp cloth and mild 
soap solution.  Wipe with an appropriate disinfectant.  Clean and install the cabinet basket assembly.

Summary of Contents for P-2010-S



















Reviews: