background image

  U N P A C K I N G   A N D   S E T - U P

Transport and Storage Environmental Conditions (not to exceed 15 days)
 

• Ambient temperature range of -40  to +159°F (-40° to +70°C)

 

• Relative humidity range of 10% to 100%, including condensation

 

• Atmospheric pressure range of 50KPa to 106KPa

DELIVERY

 

The Pedigo Blanket Warming Cabinet has been 

thoroughly tested and inspected to insure only the 
highest quality unit is provided.  Upon receipt, 
check for any possible shipping damage and report it 
at once to the delivering carrier.  

See Transportation 

Damage and Claims section located in this manual.

 

This appliance, complete with unattached items 

and accessories, may have been delivered in one or 
more packages.  Check to ensure that all standard 
items and options have been received with each 
model as ordered.
 

Save all the information and instructions 

packed with the appliance.  Complete and return 
the warranty card to the factory as soon as possible 
to assure prompt service in the event of a warranty 
parts and labor claim.  
 

This manual must be read and understood by 

all people using or installing the equipment model.  
Contact the Pedigo service department if you have 
any questions concerning installation, operation, 
or maintenance.

NOTE:

  All claims for warranty must include the 

full model number and serial number of
the unit.

UNPACKING

1.  Carefully remove the

appliance from the 
carton or crate.

 

NOTE:

   Do not discard the 

carton and other 
packaging material 
until you have 
inspected the unit 
for hidden damage 
and tested it for 
proper operation.

2.  Read all instructions in this manual carefully before 

initiating the installation of this appliance.

 

DO NOT DISCARD THIS MANUAL. 

 

This manual is considered to be part of the 
appliance and is to be provided to the owner
or manager of the business or to the person 
responsible for training operators.  

Additional 

manuals are available from the Pedigo 
service department.

3.  Remove all protective plastic film, packaging 

materials, and accessories from the appliance 
before connecting electrical power.

T R A N S P O R T   A N D   S T O R A G E

T R A N S P O R T   A N D   S T O R A G E

1

B L A N K E T   W A R M I N G   C A B I N E T

Summary of Contents for P-2010-S



















Reviews: