G E N E R A L I N F O R M A T I O N
6
This warming cabinet is designed to elevate and
maintain blanket temperatures to a level which will
increase patient comfort.
2.3 cubic feet of capacity in a single cavity countertop
warming cabinet with 22 gauge stainless steel exterior
and door with handle and hinges designed to withstand
heavy usage. The cabinet is equipped with low-heat-
density electrothermal cable mounted against the walls,
eliminating the need for a heat circulating fan. Interior
contains one (1) epoxy-coated blanket support assembly.
The cabinet is furnished with four (4) 1-1/4” (31mm)
non-skid rubber feet.
The cabinet is controlled by one (1) ON/OFF power switch
and a temperature control knob that is adjustable from 16°C
(60°F) to 92°C (200°F). The unit includes a digital display,
and a temperature display light that indicates that the
cabinet has reached the desired warming temperature.
D A N G E R
AT NO TIME SHOULD THE INTERIOR
OR EXTERIOR BE STEAM CLEANED,
HOSED DOWN, OR FLOODED WITH
WATER OR LIQUID SOLUTION OF
ANY KIND. DO NOT USE WATER JET
TO CLEAN.
SEVERE DAMAGE OR
ELECTRICAL HAZARD
COULD RESULT.
WARRANTY BECOMES VOID IF
APPLIANCE IS FLOODED
D A N G E R
DO NOT use this warming cabinet
in the presence of flammable
anesthetic mixture (with air or
with oxygen or nitrous oxide).
THIS COULD RISK AN EXPLOSION!
N O T E
The temperature inside the warmer’s
cavity shall never exceed maximum
permissable temperature plus the
tolerance. (250°F [121°C] +10%)
N O T E
Environmental conditions for operation:
Maximum ambient room temperature of 89°F (32°C).
Summary of Contents for P-2010-S
Page 18: ...MN 29621 05 21...
