Peco 50721201, Operator'S Manual

Page: 17 / 22

Figure 2-16a.
Weight Bar
(1) Weight Bracket
Per Side
(2) 3/8”-16 x 1-1/4” HHCS
(2) 3/8”-16 Flange Nut
Per Side
(1) Weight
Bracket Mount
Per Side
(1) 1/2”-13 U-Bolt
Per Side
Figure 2-16b.
2-15 Lower Hose To Boot Installation
Take the unattached end of the lower hose and slide it
over the circular end of the boot. Use the lower hose
clamp to secure the hose to the boot (Figure 2-15). Tip:
Before securing clamp rotate hose counter-clockwise
(away from yourself) approximately 1” to add in retaining
boot to mower deck.
2-16 Front Weight Installation
Secure the weight brackets P#(B0317) to the mower by
using (1) weight bracket mount P#(B0318), (2) 3/8”-16 x
1-1/4” HHCS P#(K1192) and (2) 3/8”-16 flange nuts
P#(K1215) per side (Fig. 2-16a). Next, secure the weight
to the weight brackets by using (2) ½”-13 u-bolts
P#(K0331) and (4) ½”-13 flange nuts P#(K1246). When
installing the weight you should have another person
help position the weight onto a floor jack. Using the floor
jack will make installing the weight much easier. Tighten
all nuts and bolts. Use (Figure 2-16a or 2-16b) for more
detail.
Boot
Figure 2-15.
Clamp
Lower Hose
17