Peco 22131501, Operator'S Manual, Page: 8 / 54

8
Figure A
Figure B
Lower Frame Bracket Installation
First, remove and set aside the (2) set of fasteners on the bottom right side of the mower. Refer to Figure A.
Next, align the left most bolt holes of the Lower Rt. Frame Bracket (Item #1) to the lower right bolt holes of the Rear
Frame Bracket. Then, secure the Lower Rt Frame Bracket by using (2) 3/8”-16 x 1” Carriage Bolts (Item #3) and (2)
3/8”-16 Ny-Flange Lock Nuts (Item #4). Refer to Figure B.
Finally, secure the (2) far right bolt holes of the Lower Rt Frame Bracket by using the previously removed fasteners.
Repeat the procedures for the Lower Lt Frame Bracket (Item #2) on the opposite side. Refer to Figure B.
Note: Some parts and part features have been hidden from view for visual clarity.
Retain
pre-existing
Fasteners
Secure Rt bolt
holes using
pre-existing
hardware